underbridge/README.md
2022-04-13 11:30:12 +02:00

92 lines
3.0 KiB
Markdown

# Underbridge for OP-Z
## Multitrack exporter
---
## Description
- Exports patterns and projects individual audio tracks to seperate folders for use in your DAW.
- Python cross plattform with single file binary for x86 linux Windows and Mac.
## Using Packaged single file Binarys _(The easy way)_
- Executables reside in the folder `/dist/` or in the release tab.
- on Windows
``underbridge.exe``
- On Linux:
``./underbridge``
- on Mac
Open terminal and change directory to where the underbridge_mac file is located and execute:
``chmod 755 underbridge_mac``
``./underbridge_mac`` or ``open underbridge_mac``
Underbridge_alt was packaged on a different system. Might help if you run into problems. (Outdated)
## Installation _(Less easy way)_
### Windows
- Install Python 3.9 if not already, 3.10 seems to cause problems.
- install mido : `pip install mido`
- install rt-midi: `pip isntall rt-midi`
- install pipwin: `pip install pipwin`
- install pyaudio `pipwin install pyaudio`
**- Activate OP-Z device input in sound settings of windows and make it default (Should detect automatically just to be sure. **
**- Close all other Applications that might use any audio source like your Browser etc **
- run `python underbridge.py`
### Mac Install - ( tested on Mac OS Monterey 12.3 )
install portaudio: `brew install portaudio`
install mido: `pip install mido`
install tk: `brew install python-tk`
install rt-midi: `pip install python-rtmidi`
install pyaudio: `pip install pyaudio`
**Set OP-Z device as input in sound of system preferences**
open terminal and type: `python3 underbridge.py` to start
### Ubuntu 20.10 LTS
- `sudo apt install portaudio19-dev`
- `sudo apt install python3-tk`
- `pip install python-rtmidi`
- `pip install pyaudio`
`python3 underbridge.py` to start
## Steps
- connect OP-Z via USB
- Run underbridge
### Single Pattern Mode
- Select Pattern you want to export
- Enter name for the project. This is used for the folder structure
- Get BPM from led code or Smartphone app.
- Enter BPM and longest Bar of you track (1-4)
- Optionally enter additional seconds at the end of the recording to capture reverb tails etc.
- Select pattern mode
- Select directory you want to record the waves to
- Click record and wait until finished.
### Project mode
- Select Porject and first Pattern you want to export on OP-Z.
- Enter name for the project. This is used for the folder structure
- Get BPM from led code or Smartphone app.
- Enter BPM
- Enter longest Bar of you track (1-4)
- Enter the Nr. of Patterns your song consists of.
- Optionally enter additional seconds at the end of the recording to capture reverb tails etc.
- Select project mode
- Select directory you want to record the waves to
- Click record and wait until finished.
### Troubleshooting
- When the recorded audio contains buzzing or other artifacts try disabling the USB charging with "display" and "bottom right key" to disable.
- If the playback of the OP-Z starts correctly but no tracks are muted check that MIDI IN in the OP-Z app or via combo is enabled.