mirror of
https://github.com/BKLronin/touchCNC.git
synced 2024-11-09 18:54:01 +01:00
Add files via upload
This commit is contained in:
Thomas Herrmann
GitHub
parent
81a46e45a8
commit
07909f945f
269
cnc.py
Normal file
269
cnc.py
Normal file
@ -0,0 +1,269 @@
|
||||
import serial
|
||||
import time
|
||||
from tkinter import *
|
||||
import serial.tools.list_ports
|
||||
from tkinter import filedialog as fd
|
||||
|
||||
grbl = 0
|
||||
i = 10
|
||||
GCODE = 0
|
||||
AXIS = 'X'
|
||||
|
||||
def grblConnect2():
|
||||
global grbl
|
||||
|
||||
#Serial Connection
|
||||
locations=['/dev/ttyACM0','/dev/ttyUSB0','/dev/ttyUSB1','/dev/ttyACM1','/dev/ttyACM2','/dev/ttyACM3',
|
||||
'/dev/ttyS0','/dev/ttyS1','/dev/ttyS2','/dev/ttyS3']
|
||||
|
||||
for device in locations:
|
||||
try:
|
||||
#print([comport.device for comport in serial.tools.list_ports.comports()])
|
||||
print ("Trying...",device)
|
||||
grbl = serial.Serial(port= device, baudrate= 115200, timeout =.1)
|
||||
#grbl.open()
|
||||
#print(grbl.readline())
|
||||
grbl.write(str.encode("\r\n\r\n"))
|
||||
time.sleep(2) # Wait for grbl to initialize
|
||||
grbl.flushInput() # Flush startup text in serial input
|
||||
connect_ser.config(bg='green')
|
||||
#print("connected")
|
||||
|
||||
break
|
||||
except:
|
||||
#print ("Failed to connect on",device)
|
||||
grbl = 0
|
||||
|
||||
# Stream g-code to grbl
|
||||
#Stream GCODE from -https://onehossshay.wordpress.com/2011/08/26/grbl-a-simple-python-interface/-
|
||||
|
||||
def grblConnectDebug():
|
||||
global grbl
|
||||
|
||||
grbl = serial.Serial(port= '/dev/ttyACM0', baudrate= 115200, timeout =.1)
|
||||
#grbl.close()
|
||||
#print(grbl.readline())
|
||||
grbl.write(str.encode("\r\n\r\n"))
|
||||
time.sleep(2) # Wait for grbl to initialize
|
||||
grbl.flushInput() # Flush startup text in serial input
|
||||
#print("connected")
|
||||
connect_ser.config(bg='green')
|
||||
#print(grbl.read())
|
||||
infoScreen(grbl.read())
|
||||
return grbl
|
||||
|
||||
def jogWrite(grbl,AXIS, CMD, scale):
|
||||
DECIMAL = [0.1,1,10,100]
|
||||
scale = increments.get()
|
||||
MOVE = int(CMD) * DECIMAL[scale -1]
|
||||
grbl_command = ('G91'+'G0' +' ' + AXIS + str(MOVE) + ' '+ 'F100')
|
||||
#print(grbl_command)
|
||||
grbl.write(str.encode(grbl_command + '\n'))
|
||||
grbl_out = grbl.readline() # Wait for grbl response with carriage return
|
||||
#print(grbl_out.strip())
|
||||
infoScreen(grbl_command)
|
||||
infoScreen(grbl_out)
|
||||
|
||||
def terminalWrite(grbl):
|
||||
grbl_command = terminal.get()
|
||||
#print(grbl_command)
|
||||
grbl.write(str.encode(grbl_command + '\n'))
|
||||
grbl_out = grbl.readline() # Wait for grbl response with carriage return
|
||||
#print(grbl_out.strip())
|
||||
infoScreen(grbl_out)
|
||||
|
||||
def infoScreen(data):
|
||||
global i
|
||||
terminalFrame = Frame(terminal_recv, bg = 'white')
|
||||
terminal_recv.create_window(10,i, window = terminalFrame, anchor = 'nw')
|
||||
Label(terminalFrame, text = data, font = ('Calibri',10), bg ='white', fg ='black').pack()
|
||||
i += 22
|
||||
if i >=400:
|
||||
i=10
|
||||
terminal_recv.delete("all")
|
||||
|
||||
def openGCODE():
|
||||
global GCODE
|
||||
|
||||
filetypes = (('GCODE', '*.nc'),('All files', '*.*'))
|
||||
GCODE = fd.askopenfile(title='Open a file', initialdir='/home/thomash/Environments/cnc/', filetypes=filetypes)
|
||||
|
||||
if GCODE != 0:
|
||||
fopen.config(bg='green')
|
||||
else:
|
||||
fopen.config(bg = 'grey')
|
||||
|
||||
build_xy = findEnvelope()
|
||||
mill_table.create_rectangle(build_xy[0],build_xy[1], fill = 'blue', stipple = 'gray75')
|
||||
|
||||
def findEnvelope(): #get the max used Buildspace and position of the job
|
||||
x_coords = []
|
||||
y_coords = []
|
||||
coord_max = [0,1]
|
||||
coord_min = [0,1]
|
||||
|
||||
for line in GCODE:
|
||||
|
||||
l = line.strip(line) # Strip all EOL characters for streaming
|
||||
l = line.replace('X', '')
|
||||
l2 = l.replace('Y', '')
|
||||
l2 = l2.split()
|
||||
|
||||
if len(l2) == 3:
|
||||
x = l2[1]
|
||||
x_coords.append(float(x))
|
||||
y = l2[2]
|
||||
y_coords.append(float(y))
|
||||
|
||||
x_coords.sort()
|
||||
y_coords.sort()
|
||||
coord_max[0] = max(x_coords) +50
|
||||
coord_max[1] = 350 - max(y_coords) #invertierte Buildplattform mit 0 unten links statt oben links
|
||||
coord_min[0] = min(x_coords) +50
|
||||
coord_min[1] = 350 - min(y_coords)
|
||||
|
||||
return coord_min, coord_max
|
||||
|
||||
def grblWrite(grbl):
|
||||
#print("write1")
|
||||
GCODE.seek(0)
|
||||
for line in GCODE:
|
||||
#print("write")
|
||||
l = line.strip(line) # Strip all EOL characters for streaming
|
||||
l = line.split(";",0)
|
||||
grbl.write(str.encode(l[0]+ '\n')) # Send g-code block to grbl
|
||||
grbl_out = grbl.readline() # Wait for grbl response with carriage return
|
||||
infoScreen(grbl_out.strip())
|
||||
|
||||
def grblClose(grbl):
|
||||
# Close file and serial port
|
||||
#f.close()
|
||||
try:
|
||||
grbl.close()
|
||||
print("closed")
|
||||
connect_ser.config(bg='grey')
|
||||
except:
|
||||
print("Connection still open")
|
||||
|
||||
#GUI Main
|
||||
buttonsize_x = 5
|
||||
buttonsize_y = 3
|
||||
increments = 0
|
||||
|
||||
root = Tk()
|
||||
root.title('touchCNC')
|
||||
root.geometry('1024x600+0+0')
|
||||
|
||||
increments = IntVar()
|
||||
|
||||
left = Button(root, text="-X", width = buttonsize_x, height = buttonsize_y, command = lambda:jogWrite(grbl, 'X', '-1', increments))
|
||||
right = Button(root, text="+X",width = buttonsize_x, height = buttonsize_y,command = lambda:jogWrite(grbl, 'X', '1', increments))
|
||||
up = Button(root, text="+Y", width = buttonsize_x, height = buttonsize_y,command = lambda:jogWrite(grbl, 'Y', '1', increments))
|
||||
down = Button(root, text="-Y",width = buttonsize_x, height = buttonsize_y,command = lambda:jogWrite(grbl, 'Y', '-1', increments))
|
||||
z_up = Button(root, text="+Z",width = buttonsize_x, height = buttonsize_y,command = lambda:jogWrite(grbl, 'Z', '1', increments) )
|
||||
z_down = Button(root, text="-Z",width = buttonsize_x, height = buttonsize_y,command = lambda:jogWrite(grbl, 'Z', '-1', increments))
|
||||
zero_x = Button(root, text="zero X",width = buttonsize_x, height = buttonsize_y)
|
||||
zero_y = Button(root, text="zero Y",width = buttonsize_x, height = buttonsize_y)
|
||||
zero_z = Button(root, text="zero Z",width = buttonsize_x, height = buttonsize_y)
|
||||
zero_all =Button(root, text="zero All",width = buttonsize_x, height = buttonsize_y)
|
||||
|
||||
connect_ser = Button(root, text="Cnnct",width = buttonsize_x, height = buttonsize_y, command = grblConnect2, bg = 'grey')
|
||||
discon_ser = Button(root, text="Dsconct",width = buttonsize_x, height = buttonsize_y, command = lambda:grblClose(grbl))
|
||||
start = Button(root, text="START",width = buttonsize_x, height = buttonsize_y, bg = 'red', command = lambda: grblWrite(grbl))
|
||||
stop = Button(root, text="STOP",width = buttonsize_x, height = buttonsize_y, bd= 3)
|
||||
pause = Button(root, text="PAUSE",width = buttonsize_x, height = buttonsize_y, bg = '#007fff')
|
||||
fopen = Button(root, text="GCODE",width = buttonsize_x , height = buttonsize_y, bg = 'grey', command = openGCODE)
|
||||
|
||||
spindle = Button(root, text="Spindle",width = buttonsize_x, height = buttonsize_y)
|
||||
coolant = Button(root, text="Coolant",width = buttonsize_x, height = buttonsize_y)
|
||||
tool = Button(root, text="Tool",width = buttonsize_x, height = buttonsize_y)
|
||||
macro = Button(root, text="Macro1",width = buttonsize_x, height = buttonsize_y)
|
||||
|
||||
step_incr1 = Radiobutton(root, text= '0,1', value = 1 , variable = increments,width = buttonsize_x, height = buttonsize_y, indicatoron = 0 )
|
||||
step_incr2 = Radiobutton(root, text= '1', value = 2 , variable = increments,width = buttonsize_x, height = buttonsize_y, indicatoron = 0 )
|
||||
step_incr3 = Radiobutton(root, text= '10', value = 3 , variable = increments,width = buttonsize_x, height = buttonsize_y, indicatoron = 0 )
|
||||
step_incr4 = Radiobutton(root, text= '100', value = 4 , variable = increments,width = buttonsize_x, height = buttonsize_y, indicatoron = 0 )
|
||||
step_incr2.select()
|
||||
|
||||
terminal = Entry(root, width =8, text="GCODE")
|
||||
terminal_send = Button(root, text="SEND",width = buttonsize_x, height = buttonsize_y, bd= 3, command = lambda: terminalWrite(grbl))
|
||||
terminal_recv = Canvas(root, width = 200, height =400, bg = 'white')
|
||||
|
||||
show_ctrl_x_label = Label(root,text = "X - POSITION")
|
||||
show_ctrl_y_label = Label(root,text = "Y - POSITION")
|
||||
show_ctrl_z_label = Label(root,text = "Z - POSITION")
|
||||
show_ctrl_x =Entry(root, text = "X - POSITION", width = 5)
|
||||
show_ctrl_y =Entry(root, text = "Y - POSITION", width = 5)
|
||||
show_ctrl_z =Entry(root, text = "Z - POSITION", width = 5)
|
||||
|
||||
feed_control = Scale(root, orient = HORIZONTAL, length = 400, label = "Feedrate",tickinterval = 20)
|
||||
|
||||
#Milling Area and Gcode preview with grid generation
|
||||
|
||||
mill_table= Canvas(root, width= 400, height = 400, bg = 'grey')
|
||||
try:
|
||||
meister = PhotoImage(file='meister.png', width =400, height = 400)
|
||||
mill_table.create_image(200,200,image = meister, anchor =NW)
|
||||
|
||||
except:
|
||||
infoScreen("Couldn't load background")
|
||||
|
||||
mill_table.create_rectangle(50,50,350,350, fill ='white')
|
||||
mill_table.create_text(200,25,text = 'Fräsbereich 300mm x 300mm')
|
||||
|
||||
for x in range(50,350,50):
|
||||
mill_table.create_text(x,400- x, text = x-50)
|
||||
|
||||
for x in range(0,400,50):
|
||||
for y in range(0,400,50):
|
||||
gitter_x = mill_table.create_line(x,0,x,400)
|
||||
gitter_y = mill_table.create_line(0,y,400,y)
|
||||
|
||||
left.grid(row=1, column=0, padx=3, pady=2)
|
||||
right.grid(row=1, column=2,padx=3, pady=2)
|
||||
up.grid(row=0, column=1, padx=3, pady=10)
|
||||
down.grid(row=1, column=1,padx=3, pady=2)
|
||||
z_up.grid(row=0, column=3,padx=10, pady=10)
|
||||
z_down.grid(row=1, column=3,padx=10, pady=2)
|
||||
|
||||
step_incr2.select()
|
||||
|
||||
step_incr1.grid(row=2, column=0,padx=3, pady=10)
|
||||
step_incr2.grid(row=2, column=1,padx=3, pady=10)
|
||||
step_incr3.grid(row=2, column=2,padx=3, pady=10)
|
||||
step_incr4.grid(row=2, column=3,padx=3, pady=10)
|
||||
|
||||
show_ctrl_x_label.grid(row=3, column=0,padx=3, pady=10, columnspan =2)
|
||||
show_ctrl_y_label.grid(row=4, column=0,padx=3, pady=10, columnspan =2)
|
||||
show_ctrl_z_label.grid(row=5, column=0,padx=3, pady=10, columnspan =2)
|
||||
|
||||
show_ctrl_x.grid(row=3, column=2,padx=3, pady=10, columnspan =1)
|
||||
show_ctrl_y.grid(row=4, column=2,padx=3, pady=10, columnspan =1)
|
||||
show_ctrl_z.grid(row=5, column=2,padx=3, pady=10, columnspan =1)
|
||||
|
||||
zero_x.grid(row=6, column=0,padx=10, pady=10)
|
||||
zero_y.grid(row=6, column=1,padx=10, pady=10)
|
||||
zero_z.grid(row=6, column=2,padx=10, pady=10)
|
||||
zero_all.grid(row=6, column=3,padx=10, pady=10)
|
||||
connect_ser.grid(row=7, column=0,padx=10, pady=10)
|
||||
discon_ser.grid(row=7, column=1,padx=10, pady=10)
|
||||
start.grid(row=7, column=2,padx=10, pady=10)
|
||||
stop.grid(row=7, column=3,padx=10, pady=10)
|
||||
pause.grid(row=8, column=2,padx=10, pady=10, columnspan = 1)
|
||||
fopen.grid(row=8, column=0,padx=10, pady=10)
|
||||
|
||||
spindle.grid(row=7, column=4,padx=1, pady=10)
|
||||
coolant.grid(row=7, column=5,padx=1, pady=10)
|
||||
tool.grid(row=7, column=6,padx=1, pady=10)
|
||||
macro.grid(row=7, column=7,padx=1, pady=10)
|
||||
|
||||
terminal.grid(row = 7, column = 8, padx =2, pady =10)
|
||||
terminal_send.grid(row = 7, column = 9, padx =2, pady =10)
|
||||
terminal_recv.grid(row = 0, column = 8, padx =10, pady =10,rowspan = 7, columnspan =2)
|
||||
|
||||
feed_control.grid(row = 8, column = 4, columnspan =4)
|
||||
|
||||
mill_table.grid(row=0, column=4,padx=10, pady=10,columnspan = 4, rowspan = 7)
|
||||
|
||||
root.mainloop()
|
||||
|
||||
Loading…
Reference in New Issue
Block a user